Custom Kitchen Cost in Sydney (2026)
What a custom kitchen costs in Sydney in 2026, from a compact galley to a large island kitchen, and what moves the price.
- Sydney homes since 2005
- NSW licence 487713C (Carpenter)
- $20m public liability
- Made and installed by H&R
As a Sydney planning guide, a compact custom kitchen on one wall or a galley run typically costs $15,000–$25,000, an L-shaped kitchen or small island with stone-look tops $25,000–$40,000, and a large island kitchen in 2-pac or natural stone, or one with a butler's pantry, $40,000–$70,000 or more. These are planning ranges, not a quote: the price for your kitchen is confirmed in a written quote after a measure of the room.
| Scope | Typical range (AUD) |
|---|---|
| Compact kitchen on one wall or a galley run | $15,000–$25,000 |
| L-shaped kitchen or small island with stone-look tops | $25,000–$40,000 |
| Large island kitchen with 2-pac or natural stone, or a butler's pantry | $40,000–$70,000+ |
Typical Sydney prices, supplied and installed, given as a planning guide rather than a quote. Reviewed October 2026.
A custom kitchen is made to the measured room rather than assembled from standard cabinet sizes, so the price follows the room and the specification. The ranges cover the cabinetry, benchtops and installation of the kitchen itself. Removal of the old kitchen, plumbing, electrical work, appliances and flooring are worth checking line by line in any quote.
What drives the cost of a custom kitchen
The cabinetry run. The total length of base, overhead and tall cabinets is the biggest single driver. A one-wall galley has far less cabinetry than an L-shape with an island, and a butler's pantry adds a second run of storage.
The door finish. Melamine and laminate doors cost less than 2-pac painted doors. Shaker profiles, glass fronts and handleless channels each add detail to the making and fitting.
Inside the cabinets. Drawers cost more than doors, and internal fittings such as pull-out pantries, corner systems, bin drawers and soft-close runners add to an otherwise identical cabinet.
The island. An island adds cabinetry on four sides, a second benchtop and often power and plumbing. Seating overhangs, waterfall ends and lit plinths add more.
Benchtops and splashback. Laminate, timber, porcelain and natural stone sit at very different prices. See the benchtop cost guide and the splashback cost guide for those surfaces on their own.
The room and access. Out-of-square walls, bulkheads, high ceilings and stairs or lifts between the truck and the kitchen all add time to the install.
| What you choose | Tends to cost more | Tends to cost less |
|---|---|---|
| Layout | Island, butler's pantry, tall pantry walls | One wall or galley run |
| Doors | 2-pac painted, shaker or glass fronts | Melamine or laminate, flat panel |
| Storage | Drawers, pull-outs, corner systems | Shelved cupboards |
| Surfaces | Natural stone or porcelain, waterfall ends | Laminate, standard edge |
| Site | Upper floors, tight access, older walls | Ground floor, easy access |
Where to save, and what not to cut
Ways to save:
- Keep the sink and cooktop where they are. Moving them brings in plumbing, gas and electrical work on top of the cabinetry.
- Use 2-pac where it is seen. A painted finish on the island and laminate in the pantry can keep the look where it counts.
- Choose drawers for the working zones only. Drawers near the cooktop and sink earn their cost; deep cupboards suit storage you reach less often.
What not to cut:
- The measure. A custom kitchen is only as good as the dimensions it is made from.
- Hardware in the drawers you use every day. Runners and hinges do the work for years.
- The licensed trades. Any change to plumbing, gas or wiring needs the right licence.
What these choices look like in finished kitchens
- A large island with drawers on the working side. The white shaker marble kitchen pairs a central island with white shaker cabinetry and marble-look surfaces.
- Detailed traditional cabinetry. The traditional white kitchen adds glazed display cupboards, a rangehood surround and fluted island posts.
- A compact galley that still holds a lot. The white galley kitchen fits double ovens and tall storage along one long run.
How to get an accurate custom kitchen quote
Send photos of the room, rough measurements, your suburb and a note on the layout you want. Mention whether the sink or cooktop needs to move and any must-haves such as an island, a butler's pantry or a particular door finish.
From there we talk through the brief, measure the room and prepare a written quote for the kitchen to be made in our Guildford workshop and installed. See how custom kitchens run with H&R, or compare a custom kitchen with flat-pack.
Frequently asked questions
Is a custom kitchen always dearer than flat-pack?
For the same room, usually yes, because each cabinet is made to the measured space. The gap narrows in awkward rooms, where flat-pack needs fillers and compromises to fit.
What is the cheapest way to get a custom look?
Keep the layout, choose a simple door profile and spend on one feature, such as the island or the benchtop.
Does the price include the benchtop?
The ranges allow for benchtops in the materials described. Your quote lists the benchtop material, edge and any waterfall ends separately so you can compare options.
